Document #1020
SMDR/REMOTE PORT COMMUNICATIONS SETTINGS

(Note: Management Access Security will be needed for
all of the procedures in this document. 
To place the call accounting in Management Access mode 
press the MANAGEMENT ACCESS Key followed by the code number)

PROGRAM #32 IS USED TO PRINT THE SETTINGS.
PROGRAM #33 IS USED TO CHANGE THE SETTINGS.
SETTING PORT COMMUNICATION PARAMETERS

REMOTE              SMDR/PRINTER
PORT                PORT                SMDR #47
PROTOCOL            PROTOCOL            VALUE
________________________________________________

8 none 1            7 Even 1            -7
7 Even 1            8 None 1            -97
7 Odd 1             7 Even 1             25
7 Odd 1             8 None 1             23
________________________________________________

SAME PROTOCOL       SMDR #47
IN ALL PORTS        VALUE
________________________________________________

7 Even 1            -103
7 Even 2            -120
7 Odd  1              17
7 Odd  2               0
7 None 1              51
7 None 2              34
8 Even 1             -35
8 Even 2             -52
8 Odd  1              85
8 Odd  2              68
8 None 1              -1 Default
8 None 2             102