DOCUMENT #1085 
SETTING THE OPERATING MODE FOR THE INN-FORM/XL.

(Note: Management Access Security will be needed for all of the procedures
in this document. To place the call accounting in Management Access
mode press the MANAGEMENT ACCESS Key followed by the code number)

To set or change the operating mode of the INN-FORM/XL press the
following keys;
          Press MGMT. ACCESS
          Put in the System Access code.
          Press ENTER.
          Press MODE SET key.
               The Display will say; "MODE #" or "E-MODE #.
          Press the number of the mode the system should be in.
          Press ENTER
               The Display will say: "MGMT ACCESS"
          Press MGMT. ACCESS to go back to time and date.

Print a program #10 to check and verify that the system is in the
desired mode. The current mode will be located at the end of the first 
or beginning of the second line in the Copyright section.

The INN-FORM/XL has four different modes:

     Mode #O = The standard operating mode.
  	       (DEFAULT, the system will always return to this mode 
               after a chip change or on a new install)

     Mode #7 = The same as the standard operating mode with the
               added feature of sending non-call data, like "WAKE-
               UP" calls, to the printer.
     
     Mode #8 = The direct pass through mode from the telephone
               system.  This mode will print raw telephone call
               information to the printer.

     Mode #9 = The testing mode. The first line will be the raw 
               telephone call data, directly from the phone system.
               The second line will be the same depending on Program #6
               (Print NO CHARGE CALLS: YES/NO) call record information
               in the processed format or it will be a brief message
               explaining why the system did not process the call.
               The Messages can say;
                    "checking fields bad"
                    "insufficient input"
                    "under grace period"